Dropping off a package with or without a reserved locker at the ParcelPoint Smart Lockers

Print this support article
Products affected: ParcelPoint™ Smart Lockers

You can choose an available locker and add a recipient's package to that locker directly at the kiosk.

If the recipient already has lockers with packages in them, you can also add more packages to those lockers.

  1. Tap on the Settings icon on the Home screen.
    home-admin
  2. Scan your ID badge or enter your user ID.
    enter-id-scan-barcode
    If you enter your ID, tap Next to continue.
  3. Enter your password.
    enter-psswd
    Tap Go to continue.
  1. Scan the shipping label barcode or enter the tracking ID of the package.
    drop-off-scan-barcode_406x228
  2. Choose the recipient.
    choose-recipient_411x232
    • If the recipient does not have any packages in any lockers, continue to step 3.
    • If the recipient already has packages in lockers, see Add packages to existing lockers.
  3. Choose the locker size.
    choose-locker-size_424x242
  4. Once you select the size, tap Update Reservation. The kiosk screen then displays the locker number and the system opens the locker.
    locker-number-3-open_417x234
  5. Place the package in the locker and close the locker door. Return to the kiosk.
    tap-done-or-no-fit-3_415x235
  6. If for any reason you need to reopen a locker, for example, you closed it by mistake, tap Reopen Locker. Refer to Reopening a locker . If the package does not fit in the assigned locker, tap Does Not Fit. Refer to Choosing another locker .

Add packages to existing lockers

  1. If the recipient already has lockers with packages in them the kiosk displays the locker numbers.
    add-to-existing-locker_409x229

  2. Choose the locker by tapping on Add to Locker directly below the locker number. The kiosk screen displays the locker number and the system opens the locker.
    locker-number-7-open_408x235

  3. Place the package in the locker and close the locker door. Return to the kiosk.
    tap-done-or-no-fit-7_416x233
  4. If for any reason you need to reopen a locker, for example, you closed it by mistake, refer to Reopening a locker . If the package does not fit in the assigned locker, tap Does Not Fit. Refer to Choosing another locker .

UPDATED: June 03, 2021