Setting up the iDimension Plus dimensioner in PitneyShip, PitneyShip Pro, or PitneyShip Enterprise
A dimensioner is a device that allows you to get the dimensions of a package in a single click so that you don't have to manually enter them. The iDimension Plus dimensioner is a floor-standing model with an integrated scale.
Products affected: PitneyShip®, PitneyShip® Pro, PitneyShip® Enterprise
A dimensioner is a device that allows you to get the dimensions of a package in a single click so that you don't have to manually enter them. The iDimension Plus dimensioner is a floor-standing model with an integrated scale.
- Open DeviceHub (Start > All Programs > DeviceHub > DeviceHub).
- Select + Add Dimensioner.
- Enter a Name for the dimensioner and its IP Address. To find the IP address of the dimensioner:
- On the dimensioner screen, select the i icon.
- On the Device Info screen, select the Configuration icon.
- On the Configuration menu, select the IP Address button.
- On the dimensioner screen, select the i icon.
- Select Add.
- Once you see the message that the dimensioner has been successfully added, click OK. The dimensioner will be listed on the Printers & Scales screen along with any printers and scales.
To use the dimensioner when creating a label, select the Get Dimensions button. If you have more than one dimensioner, select it from the drop-down arrow.
The features and options you see may vary depending upon your role and subscription. If you have any questions regarding your permissions, please contact your administrator.
UPDATED: November 04, 2026