Editing the differential weighing threshold on the SendPro MailCenter 1000, 2000, and 3000

Edit the differential weighing threshold to set the minimum weight each mailpiece must weigh before the meter prints your mail.

• If you set the threshold too high, the scale will not recognize the removal of a mailpiece that falls below the weight threshold.
• If you set the threshold too low, you may be prompted to return a mailpiece to the scale. This will happen if the meter cannot record the weight properly due to bounce on the scale.

Tip: Weigh the lightest piece of mail in the stack and set a threshold below that value.

1. Select Run Mail from the Home screen.
2. Select the Weighing button.
   
3. Select Differential Weighing.
   
4. Select Edit threshold.
   
5. Enter the desired threshold in the pounds and ounces fields.
6. Select OK twice to return to the Run Mail screen.