Changing the envelope print area on the SendPro MailCenter 1000, 2000, and 3000

You can adjust the distance of the graphic from the top edge of the envelope or from the left or right sides of the envelope. By adjusting the top vertical edge, you move all of the printed elements on the envelope up or down.

Adjusting the distance from the right side of the envelope moves all right-justified elements to the left or right. These elements include any item on the left side of the print, for example, a graphic ad, inscription or text message.

1. Select Run Mail from the Home screen.
2. Ensure that the appropriate job is open and selected.
3. Select anywhere within the envelope on the Run Mail screen. You can also select Edit envelope.
4. Select Print position on the left of the Edit envelope screen.
5. Set the offset value from the left and right edge of the envelope. The left margin offset range is 0.00 to 0.50 inch (0 to 12.7 mm). The right margin offset range is 0.25 to 1.0 inch (6.35 to 25.4 mm). Select the + or - button once to increase or decrease the value by 0.10 inch (or 2.54 mm).
6. Set the offset value from the top edge of the envelope using the same method used for setting the left and right edge offset. The offset range from the top of the envelope is 0.24 to 0.51 inch (6 to 13 mm). Select the + or - button once to increase or decrease the value by 0.05 inch (or 1 mm).
7. Select OK when done. You return to the Run Mail screen.