Setting up a wireless (Wi-Fi) network connection on the SendPro CX Series
You can connect your device via a wireless network connection.
Products affected: SendPro® CX 100, SendPro® CX 200, SendPro® CX 300 and SendPro® CX 500
You can connect your device with a wireless network connection.
- Tap Settings.
- Tap Wi-Fi in the Device & Network section.
- Choose your Wi-Fi network from the list. Tap Add Network if your Wi-Fi network does not appear.
- Enter your Wi-Fi password.
Tip: Use the show password option to make sure that you enter your password correctly.
Setting up a Static IP address
Contact your IT department to obtain the Static IP settings you will need to enter for your device. The values required are:
- IP Address
- Gateway
- Network Prefix Length
- Primary DNS
- Secondary DNS.
- Tap Settings.
- Tap Wi-Fi in the Device & Network section.
- Choose your Wi-Fi network from the list. Tap Add Network if your Wi-Fi network does not appear.
- Tap Advanced Options.
- Select the IP Setting menu and choose Static.
- Tap each line and enter the value provided by your IT department.
- Tap the > in the green circle to proceed.
Related topics
UPDATED: October 06, 2026