Creating job settings in Relay Integrity Pro

The Options screen is where you specify your Relay model, fold type, and paper size in Relay Integrity Pro.
Products affected: Relay® Integrity Pro

The Options screen is where you specify your Relay model, fold type, and paper size.

  1. In the Home screen, click Options.
  2. Leave the folder paths as the default setting.
    folder paths
  3. Select your inserter model .
    inserter model
  4. Select the fold type (available for Relay models 2500, 3500, or 4500 only).
    rip-options-fold-type
  5. Select printer options.
    (Optional) Select Print after Processing to send the job directly to a printer instead of a file.
    print options
  6. Set single-sided (Simplex) or double-sided (Duplex) printing from the Document section.
    document options
  7. Set a threshold for Overcount in the Document section.
    document options
    Note: The Overcount setting allows you to configure the maximum number of sheets for each mail piece. This setting is Inserting system and setting dependant. See your Inserting system operator guide. Files with pages greater than the Overcount value are sent to an automatically created job subfolder within the Job Overcount folder. Files within the Overcounts folder do not have barcodes. They require manual printing and inserting into the envelope.
  8. Select a Paper Size .
    rip-options-paper-size-new
  9. Click barcode Location to load a sample file and set your barcode location on the page. To do this visit Locating a barcode on your mailpiece.
    barcode location
  10. (Optional) Click Advanced Options to specify your barcode size and shape, along with other options.
    advanced options
  11. When all options are selected, click OK.
    options-screen-new_850x485
  12. Click the Jobs pull-down menu.
  13. Select Save Job.
    rip-options-save-job-new_499x285

Related topics

UPDATED: October 03, 2022