Skip to main content
Related Search Topics: Installation, Setting Up & Drivers
Print this support article

Installing PitneyShip Cube using the PitneyShip mobile app

Learn how to set up your PitneyShip Cube using the PitneyShip mobile app

Products affected: PitneyShip™ Cube, PitneyShip® mobile app

These instructions will guide you through a first-time installation of your PitneyShip Cube printer on a mobile device.

  1. Opening the box and unpacking
  2. Installing the PitneyShip mobile app
  3. Logging in to your PitneyShip account
  4. Connecting your PitneyShip Cube
  5. Performing a test print

number-1 Opening the box and unpacking

What's in the box

  1. Unpack the device and remove the protective scale spacers.
    Removing the protective scale spacers
  2. Feed the label roll into the slot.
    1. Open the label roll cover.
      Open label roll cover
    2. Remove the protective sheet and the tape from the label roll.
      Removing protective slip and tape
    3. Feed the label roll over the top of the black roller and out through the slot. Do not feed the label roll under the black roller. This will cause the label roll to jam.
      Feeding label roll through slot
  3. Connect the device to a power source and press the power button. The LED will light up orange and then flash white until your PitneyShip Cube is connected.
    Connecting the PitneyShip Cube to the power sourcePressing the power button
  4. Set up and complete the installation using the PitneyShip mobile app app.

number-2 Installing the PitneyShip mobile app

  1. On your phone, open the App Store (Apple) or Play Store (Google Android).
  2. Search for PitneyShip Ship and Track.
  3. Tap on the PitneyShip mobile app App.
  4. Download and install it as you would any other app.

number-3 Logging in to your PitneyShip account

If you are a new PitneyShip user, you will need to create an account before logging in to PitneyShip. If you are an existing PitneyShip user, follow the instructions for logging in to PitneyShip.

Creating a PitneyShip account

  1. Tap Sign up now.
  2. Swipe to select your PitneyShip plan, and tap Subscribe Now.
  3. Fill in your account details, then tap Subscribe Now.
  4. The system will send you an email verification. From your email inbox, open the email, and tap Verify My Email.
  5. Enter your email address, then tap Next.
  6. Enter your password and tap Sign In.

Logging in to your PitneyShip account

  1. Enter your email address, then tap Next.
  2. Tap Sign in to my Existing Account.
  3. Enter your password, then tap Sign In.

number-4 Connecting your PitneyShip Cube

Connecting your PitneyShip Cube differs for new users and existing users. For new PitneyShip Cube users, follow the instructions for New PitneyShip Cube users. For existing PitneyShip Cube users, follow the instructions for Existing PitneyShip Cube users.

New PitneyShip Cube users

  1. On the Home screen, tap Connect Now.
    Connect Now banner message
    If you do not see the Connect Now banner, tap More > Printer Options > Setup PitneyShip Cube. Then tap Start Set Up.
  2. Tap Next.
  3. An on-screen dialogue will pop up asking, "Are you seeing a slowing blinking white light?" If the LED light is blinking fast, please wait a few seconds to allow the LED light to start blinking slowly. Then tap Yes. If the LED light is blinking fast and does not start blinking slowly, tap No. Follow the on-screen instructions and tap Next.
  4. To allow location and network permissions, tap Next. This step is required.
  5. Tap Join to allow PitneyShip to join the PitneyShip Cube Wi-Fi network.
  6. Select your Wi-Fi network from the list of available networks, then tap Next. If you do not see a list of Wi-Fi networks, tap Refresh list and select your Wi-Fi network.
  7. Type in your Wi-Fi password, then tap Connect PitneyShip Cube.

PitneyShip Cube will now connect to your Wi-Fi network. This could take a few minutes to complete. Once complete, you will be asked to perform a test print.

Existing PitneyShip Cube users

  1. For existing users, tap More > Printer Options > Setup PitneyShip Cube.
  2. Tap Start Set Up.
    pscube-start-setup_268x522
  3. Tap Next.
  4. An on-screen dialogue will pop up asking, "Are you seeing a slowing blinking white light?" If the LED light is blinking fast, please wait a few seconds to allow the LED light to start blinking slowly. Then tap Yes. If the LED light is blinking fast and does not start blinking slowly, tap No. Follow the on-screen instructions and tap Next.
  5. To allow location and network permissions, tap Next. This step is required.
  6. Tap Join to allow PitneyShip to join the PitneyShip Cube Wi-Fi network.
  7. Select your Wi-Fi network from the list of available networks, then tap Next. If you do not see a list of Wi-Fi networks, tap Refresh list and select your Wi-Fi network.
  8. Type in your Wi-Fi password, then tap Connect PitneyShip Cube.

number-5 Performing a test print

  1. Tap Next.
    Tapping next after PitneyShip Cube setup is complete
  2. On the Print a Test Print page, tap Print.
  3. If the test print was unsuccessful, tap No. Then, tap Print Again. If the second test print was unsuccessful, please chat with us for further assistance.
  4. If the test print was successful, tap Yes.
  5. PitneyShip will now prepare your device and finalize setting up your account. Once complete, tap Get Started.

Your PitneyShip Cube setup is now complete.

Related topics

UPDATED: March 11, 2026