Turning barcode auto-enter on or off on the SendPro MailCenter 1000, 2000, and 3000

Set up your meter so that after it scans in a barcode value and it appears on the screen, it requires the operator to press Enter to accept that value.

Use this if you want an operator to confirm the correct barcode was scanned. By default, the meter automatically enters the value as soon as it scans in the barcode.

1. Select Settings from the Home screen.
2. Select System.
3. Select Scanner Settings.
4. Select the Barcode Auto-Enter tab. Select the On option button to turn on the Auto-Enter feature; select Off turn it off.
5. Select Home to return to the Home screen.