Printing and Reprinting Stamp Sheets in SendPro Enterprise

Learn how to print stamp sheets in SendPro Enterprise.
Products affected: SendPro® Enterprise
Each stamp sheet has a unique serial number and contains 25 blank stamp stickers. SendPro Enterprise keeps track of how many stamps you print with each serial number, so you do not have to use the entire sheet at once. Compatible stamp sheets can be purchased in our online shop, item# SL-SPM01.

Watch this video or follow the instructions below to learn how to print stamps in SendPro Enterprise.

Printing Stamps

  1. Open the Stamps app. If using the Desktop App, click Print Stamps from the landing page.
  2. Enter the stamp sheet page serial number into the Serial Number field.
  3. (Optional) Click Test Print to print test stamps for proper alignment. A test print should be performed whenever a new printer is used for the first time.
  4. (Optional) Complete the chargeback and reference fields in the Accounting and References section.
  5. Click RATE.
  6. Click PRINT STAMPS.

Reprinting Stamps

  1. Open the Stamps app. If using the Desktop App, click Print Stamps from the landing page.
  2. Enter the stamp sheet page serial number into the Serial Number field. If the serial number is correct, the stamp sheet image will display the used stamps with a USED watermark.
  3. Click the ellipsis () next to the TEST PRINT button, then click REPRINT SHEET. Only one reprint of a stamp sheet is permitted by USPS regulations, and must be done within 24 hours of the original print. The original sheet must be destroyed.
  4. Read and acknowledge the reprint disclaimer by clicking Confirm.

UPDATED: November 23, 2021