Skip to main content
Related Search Topics: Features & Settings Printing
Print this support article

Setting the Print Options for the PB-SP100 Printer (Mac)

Setting Print Options is required after you have installed the Mac CUPS driver.
Products affected: PB-SP100

Setting Print Options is required after you have installed the Mac CUPS driver. See Installing the Mac CUPS Driver for the PB SP-100 Printer for installation instructions.

To set your Print Option Settings follow the steps below.

  1. Start an application.
  2. Select Print in the File menu.
    sp-100-mac-CUPS-driver-settings-1
  1. Select Paper Size
  2. Select Printer Features in Application Name combo box.
    sp-100-mac-CUPS-driver-settings-2_500x333
  1. In General feature set, you can set Sensor Type, Rotation Angle, Number of Copies.
  2. In Printer Setting feature set, from the Feature set drop down menu, you can set Darkness, x Margin, y Margin, Print Rate, Black mark offset, Tear-off offset, Whether to compress printing or not.
    sp-100-mac-CUPS-driver-settings-3_500x307

UPDATED: August 18, 2023