Printing a shipping label on the SendPro C, SendPro+, SendPro C Auto

Print this support article
Products affected: SendPro® C, SendPro®+, SendPro® C Auto (8H00, 9H00)

Use Create Shipping Labels to get the best pricing, free tracking, and detailed delivery history for USPS package services. You can also send via UPS® or FedEx®. The packaging options and benefits are almost identical.

  1. Tap Print on Envelopes on the Home screen.
  2. Tap the carrier you wish to use.
    Shipping label carrier screen
  3. Verify that the sender address is correct. If not, tap on the Sender field and select a new address.
    Shipping label sender address screen
  4. If cost accounts are enabled, you must select an account. If an account is already present, verify that it is correct. To change or add the account, tap Cost Account and select an account.
    Shipping label cost account selection
  5. Tap Continue.
  6. Enter the recipient address manually or tap Address book to select one from the address book.
    Shipping label recipient address selection
  7. Tap Continue.
  8. Tap a package type.
    Shipping label package type selection
  9. Enter the dimensions and weight of the package:
    • Tap each dimension and enter a value. Tap the green check mark when done.
    • If you have an attached scale, place the package on the scale and tap Weight. Tap Scale and the weight appears. Tap Apply.
    • If you do not have a scale, tap Weight and enter the weight, then tap Apply.
      Shipping label package dimensions selection
  10. Tap Continue.
  11. Tap the service you wish to use.
    Shipping label service selection
  12. To add additional services, tap Add additional services. If you are not adding any extra services, go to step 14.
    Shipping label additional services selection
  13. Select the desired services and tap Apply.
    Shipping label extra services
  14. To print the label, tap Print.
  15. On the Label Options screen, tap Format and select the printer format.
    Shipping label print options
  16. (Optional) Tap Print Sample to print a sample label.
  17. Tap Print again and the label prints.
    • You may need to enter the Sender and Recipient's phone number, as it is required for some services.
  18. The carrier screen reappears.

UPDATED: July 29, 2021