Creating a permit job on the Connect+ series and SendPro P series

Learn how to create a permit job on the Connect+ 500W, Connect+ 1000, Connect+ 2000, Connect+ 3000, SendPro P1000, SendPro P1500, SendPro P2000, and SendPro P3000.
Products affected: Connect+® 500W, Connect+® 1000, Connect+® 2000, Connect+® 3000, SendPro® P1000, SendPro® P1500, SendPro® P2000, SendPro® P3000
You can print a permit on a piece of mail instead of an indicia. A permit is a postal mark containing a permit number that provides you with special processing or discount rates. You get the permits from the US Post Office.
  1. From the Run mail screen, select Options.
  2. Select Create new job...
  3. Select Permit job.
  4. Select OK. A new job tab appears. The Job Properties box is populated with the required permit job settings.
  5. Select Permit Holder City and State.
  6. Type the city and state.
  7. Select OK.
  8. Select Company Name or Permit Number.
  9. Enter either the permit number or the company name.
  10. Select OK.
  11. Select Class. Examples are non-profit or presort.
  12. Select the appropriate class.
  13. Select OK.
  14. Select the Save As link at the top of the screen.
  15. Type a name for the job and select OK.
Note: If accounting is enabled, you will need to select an account before running mail.

UPDATED: August 14, 2021