Setting up a wireless (WiFi) connection with a SmartLink device on the mailstation series and DM100i-DM475

Use a SmartLink device to connect your meter to the Pitney Bowes Data Center with a wireless (WiFi) connection. These instructions are for first-time users who have never installed a SmartLink device on the mailstation, mailstation2, DM125, DM300C, DM400C, or DM475.
Products affected: mailstation™, mailstation2™, DM100®i, DM125™, DM200L™, DM225™, DM300C™, DM400C™, DM450C™, DM475™
To configure a wireless (WiFi) connection with a SmartLink™ device:
  1. Go to the SmartLink Setup page.
    1. Select Wireless under 'Choose Your Connection.'
    2. Follow the directions to configure your wireless connection.
  2. After configuring your wireless connection:
  • If your SmartLink device shows the USB Connectivity light USB connectivity icon as solid green and the Network Connectivity light User-added image as blinking green, then your SmartLink device is successfully connected.
smartlink device running correctly
Related topic

UPDATED: October 09, 2023