Setting screen saver timeout on the Connect+ Series and SendPro P

Print this support article
Products affected: Connect+® 500W, Connect+® 1000, Connect+® 2000, Connect+® 3000, SendPro® P1000, SendPro® P1500, SendPro® P2000, SendPro® P3000

Follow these steps to change your screen saver timeout period.

  1. Select Settings under the Mailing tab on the Home screen.
  2. Select System from the list on the left side of the screen.
  3. Select Timeouts.
  4. Select Screensaver.
  5. Select Open Timeout.
  6. Set your desired time for your screen saver to activate.

If you need further assistance, please use the Contact Us options below.

UPDATED: August 14, 2021