Sealing without printing envelopes on the Connect+ series and SendPro P

Print this support article
Products affected: Connect+® 500W, Connect+® 1000, Connect+® 2000, Connect+® 3000, SendPro® P1000, SendPro® P1500, SendPro® P2000, SendPro® P3000
You can use Seal Only mode to seal envelopes without printing anything.
  1. Select Run Mail from the Home screen.
  2. Select Sealer.
  3. Select Seal only, No printing.
  4. Select OK.
To exit Seal Only mode:
  1. Select Sealer.
  2. Select Exit seal only mode.
  3. Select OK.
If you need further assistance, please use the Contact Us options below.

UPDATED: August 14, 2021