How to fill the sealer on the DI500 and DI600

Print this support article
Products affected: DI500 and DI600
Follow these steps to add sealing solution:
  1. Open the sealer bottle cover located at the front, right side of the machine
  2. Remove the bottle
  3. Unscrew the cap
  4. Fill the bottle with sealing solution or water
  5. Replace the cap
  6. Place the bottle back into the machine
  7. Close the sealer bottle cover
Note: If this is the first time you are filling the sealer bottle, or if the sealer bottle was completely empty, allow time for the solution to soak through the sealer mechanism before processing material.

UPDATED: August 14, 2021