Follow these steps to create a job on the DI500/DI600:
Make sure you know the details about all items in the job (envelope size, number of sheets to be folded, fold type, etc)
Press Menu
Select Supervisor Functions
Enter code 71
Select Create Job
Select Job Settings
Select the appropriate settings for your job from the following options:
Note: The selections you make for a setting and the options installed on your system determine the availability of job settings. As a result, some of the settings in the following list might not display on your system.
Does this job use an outer Envelope
Yes - Creates a job to be folded and Inserted
No - Fold Only (If not using an outer envelope, go step h)
Select the depth of the Outer Envelope
105 mm # 10
152mm 6x91/2
Custom
Does the Outer envelope have a window
Yes
No
Seal Outer Envelope
Seal
Safe Seal (A reduced speed sealing option)
No Seal
What does the job contain
Sheets Only
Sheets and Inserts
Inserts Only
Select the length of the longest Sheet
279 mm Letter
356 mm Legal
Custom
Is Optical Mark Recognition (OMR) used in this job
No, OMR not used
Yes, Non - Selective Feed
Yes, Selective Feed
Select desired Fold Type
C Fold
Z Fold
Double Fold
Single Fold
Select the position of the address on the First Sheet Stack
Top
Bottom
Does your first stack of sheets contain pre-collated sets
Yes
No
Select the number of sheets in the pre-collated set
2
3
4
Do you want to link feeders? Note: Linking feeders means you put the same sheets in multiple feeders.
Yes
No
Select the number of feeders that will contain the sheet stack
2
3
4
Is Double Detect used for this sheet stack
Yes
No
Are there any more stacks of sheets used in this job
Yes
No
Select the number of Inserts used in this mail piece.
1
2
Select Insert Type. Note: Maximum thickness of an Insert is 2mm.
Booklet
Slip
Pre-Fold Insert
Reply Envelope
Select the number of feeders that will contain this insert.