Clearing a flapper stall on the Relay 2000, 3000, and 4000

Print this support article
Products affected: Relay 2000™, Relay™ 3000, Relay™ 4000

To clear a flapper stall:
  1. Remove the sheet feeder trays and the fold plate.
  2. Pull the blue lever to release the flapper cover.
  3. Open the manual knob door.
  4. Lift up the flapper cover.
  5. Turn the manual knob clockwise to remove the stalled material.
  6. Close the flapper cover and the manual knob door.
  7. Install the fold plate and sheet feeders.
  8. Load material into the same feeder.

UPDATED: June 29, 2021