Creating and printing a shipping label on the SendPro C Lite, SendPro C, SendPro+, SendPro C Auto

Print this support article
Products affected: SendPro® C Lite, SendPro® C, SendPro®+, SendPro® C Auto  (2H00, 8H00, 9H00)
Use Trackable Labels to get the best pricing, free tracking, and detailed delivery history for USPS package services.  You can also send via UPS® or FedEx®. The packaging options and benefits are almost identical.
  1. Tap Trackable Labels on the Home screen.
  2. Tap the carrier you want to use. For example, tap USPS.
    Shipping label carrier screen
  3. Verify that the sender address is correct. If not, tap on the Sender field and select a new address.
    Shipping label sender address screen
  4. If cost accounts are enabled, you must select an account. If an account is already present, verify that it is correct. To change or add the account, tap the Cost Account field and select an account.
    Shipping label cost account selection
  5. Tap Continue.
  6. Enter the recipient address. You can manually enter the recipient information or select one from the address book. To select one from the address book, tap the Address icon in the upper right corner of the screen as shown here.
    Shipping label recipient address selection
  7. Tap Continue.
  8. Tap a package type. For example, Box or Envelope.
    Shipping label package type selection
  9. Enter the dimensions and the weight of the box or envelope:

    • Tap each dimension and enter a value using the display keypad. Tap the green check mark when done.
    • If you have an attached scale, place the box or envelope on the scale and the weight appears in the weight field. If you do not have a scale, tap on the Weight field and enter the value using the keypad and then tap Apply.
      Shipping label package dimensions selection
  10. Tap Continue.
  11. Tap the service you want to use, in this example, Priority Mail.
    Shipping label service selection
  12. Tap Add additional service to add extra services. If you are not adding any special services, go to step 14.
    Shipping label additional services selection
  13. Select the extra service, in this example, Signature Confirmation.
    Shipping label extra services
  14. You can continue to add additional services if necessary. Tap Apply when done.
  15. Tap Print.
  16. At the Label Options screen, tap Format and select the printer format. For example, tap Roll- 4x6.
    Shipping label print options
    Note: Tap Print Sample if you want to print a sample label.
  17. Tap Print again and the label prints.
    • You may need to enter the Sender and Recipient's phone number (required for some services).
  18. The carrier screen reappears. You can now print another label.

UPDATED: January 07, 2021