Changing the default refill amounts for Envelope Printing on the SendPro C Lite, SendPro C, SendPro+, SendPro C Auto

Print this support article
Products affected: SendPro® C Lite, SendPro® C, SendPro®+, SendPro® C Auto (2H00, 8H00, 9H00)

There are two ways to change the default Envelope Printing refill amount.

From the Home Screen:

  1. Tap the Settings icon in the global toolbar.
  2. Scroll down to the Envelope Printer Settings section. 
  3. Tap Postage Refills.
  4. Tap the box under Default refill amount.
  5. Tap the back key to remove the existing amount. You may need to tap the key multiple times to clear the amount.
  6. Enter the new amount.
  7. Tap Apply.

From within the Envelope Printing application:

  1. Tap Envelope Printing from the Home screen.
  2. Tap Postage Balance.
  3. Tap Refill Settings.
  4. Tap the box under Default refill amount.
  5. Tap the back key to remove the existing amount. You may need to tap the key multiple times to clear the amount.
  6. Enter the new amount.
  7. Tap Apply.
To set the default refill amount for Trackable Labels, see Changing the default refill amounts for Trackable  Labels on SendPro C200-C425 .
If you need further assistance, please use the Contact Us options below.

UPDATED: August 14, 2021