Sending Certified mail on the SendPro C Lite, SendPro C, SendPro+, SendPro C Auto

Print this support article
Products affected: SendPro® C Lite, SendPro® C, SendPro®+, SendPro® C Auto  (2H00, 8H00, 9H00)
Certified Mail is a USPS service that provides you with proof of mailing by sending you a receipt once your mailpiece arrives at its destination. 

Not all extra services like Certified Mail are available for all classes and you can only combine certain services.

To find out more about Certified Mail, open Postal Advisor:
  • Tap Postal Advisor in the application drawer at the bottom of the Home screen, or,
  • Tap SendPro Apps on the Home screen, then tap Postal Advisor.
To send Certified Mail:
  1. Tap Envelope Printing on the Home screen.
  2. If you have the accounting feature enabled, tap Account and select an account. If your device's model number is 8H00 or 9H00 and if you have only a single account, once you select that account the device will remember that account the next time you start Envelope Printing.
  3. Tap Class.
  4. Tap Start Over to show a list of the available classes.
  5. Tap a class that you can combine with Certified Mail (for example, First-Class or Priority Mail). 
  6. Tap on the mailpiece type (for example, letter or large envelope).
  7. Select Certified and tap Apply
  8. Depending on the class and type of mailpiece:
    • Enter the destination ZIP Code and tap Apply.
    • If you're using E-Certified, enter the Mailer ID and tap Apply
  9. Enter the barcode from the label and tap Apply.
  10. Place the envelope or envelopes on the feed deck. Depending on the SendPro C model you have, feed the envelopes manually or tap Start to feed the envelopes. 
  11. Place green Certified Mail label (USPS Label 3800-N) on the mailpiece.
Related topics

UPDATED: August 14, 2021