Comparing rates when printing a shipping label on the SendPro C Lite, SendPro C, SendPro+, SendPro C Auto

If you have SendPro application software version 2.0.061R or later, your system allows you to compare the shipping rates of different carriers for every mailpiece or package.
Products affected: SendPro® C Lite, SendPro® C, SendPro®+, SendPro® C Auto (8H00, 9H00)

If you have SendPro application software version 2.0.061R or later, your system allows you to compare the shipping rates of different carriers for every mailpiece or package.

  1. Tap Create Shipping Labels on the Home screen.
  2. Tap the carrier you wish to use.
    Shipping label carrier screen
  3. Verify that the sender address is correct. If not, tap on the Sender field and select a new address.
    Shipping label sender address screen
  4. If cost accounts are enabled, you must select an account. If an account is already present, verify that it is correct. To change or add the account, tap Cost Account and select an account.
    Shipping label cost account selection
  5. Tap Continue.
  6. Enter the recipient address manually or tap Address book to select one from the address book.
    Shipping label recipient address selection
     
  7. Tap Continue.
    carrier-compare-recip-addr-selected
  8. Tap a package type.
    Shipping label package type selection
  9. Enter the dimensions and weight of the package:
    • Tap each dimension and enter a value. Tap the green check mark when done.
      green-check-for-dimensions
    • If you have an attached scale, place the package on the scale and tap Weight. Tap Scale and the weight appears. Tap Apply.
    • If you do not have a scale, tap Weight and enter the weight, then tap Apply.
  10. Tap Continue.
    Shipping label package dimensions selection
    The system displays a list of the available carriers along with their estimated delivery dates and the total cost to send the package. Scroll down the screen to view all the carriers and their rates.
    carrier-compare-select-best-carrier
  11. Tap the carrier you want to use. This example uses Priority Mail.
    carrier-compare-selected-carrier
  12. To add additional services, tap Extra Services. If you are not adding any extra services, go to step 14.
    Shipping label additional services selection
  13. Select the desired service or services.
    Shipping label extra services
  14. Tap Apply. The system displays the total cost including the additional service.
  15. Tap Print to print the label.
    carrier-compare-total-cost
  16. Tap Format and select the label size.
    Shipping label print options
  17. (Optional) Tap Print Sample to print a sample label.
  18. Tap Print again and the label prints.
    • You may need to enter the Sender and Recipient's phone number, as it is required for some services.

Related topics

UPDATED: July 09, 2024