Printing a sample mailpiece on the Connect+ Series, SendPro P

Print this support article
Products affected: Connect+® 500W, Connect+® 1000, Connect+® 2000, Connect+® 3000, SendPro® P1000, SendPro® P1500, SendPro® P2000, SendPro® P3000

To run a sample mail piece on the franking machine to ensure the job will run with all elements (address, graphics etc.) positioned correctly:

  1. Ensure that the job is open and selected on the Run Mail screen.
  2. Press the Options key.
  3. Select Print a sample piece.
  4. Select Start or Tape.
If you need further assistance, please use the Contact Us options below.

UPDATED: 14 August 2021