Cleaning the Sensors, Roller and Media Path on the PB-SP100 Printer

Print this support article
Products affected: PB-SP100

Cleaning the sensors, roller and media path on your printer is essential maintenance and will help to maintain good print quality.

To perform this maintenance please follow the instructions below.

Warning: Please refer to the PB-SP100 Safety instructions before lifting the top cover. Do not touch heated area of print–head when cleaning. Personal injury may result from static electricity.
  1. Open the top cover and remove the label roll.
  2. Remove any dirt, dust or foreign objects with a cloth or cotton swab soaked in alcohol.

sp-100-top-cover-open_500x399

Caution

  • Ensure that the printer is turned off before cleaning.
  • The Print head is very hot when printing. Allow to cool before cleaning the print head.

UPDATED: October 06, 2020