Skip to main content
Related Search Topics: Printing Features & Settings
Print this support article

Printing the received date and time on the Connect+ Series and SendPro P

Learn how to print the received date and time on the Connect+ Series and SendPro P
Products affected: Connect+® 500W, Connect+® 1000, Connect+® 2000, Connect+® 3000, SendPro® P1000, SendPro® P1500, SendPro® P2000, SendPro® P3000
The Received date and time option allows you to print the current time and date, along with the word “Received” on incoming mail. If you have already created a received date and time job, open the job and begin running mail. If your system uses accounting, a piece count will be retained for accounting reports.

Note: When printing the date and/or time, the sealer is set to off. 
  1. Select the Options button at the bottom of the Run Mail screen.
  2. Select Create new job... and then select Received date and time.
  3. Select OK.
  4. Select Start or Tape.
  5. To save the job, select the Save As link at the top of the screen.
  6. Type in the job name and select OK.

UPDATED: 14 August 2021