Setting up a wired LAN connection on the DM60

You can connect your DM60 franking machine via wired LAN or a wireless (Wi-Fi) network.
Products affected: DM60™ (K722)

You can connect your DM60 franking machine via wired LAN or a wireless (Wi-Fi) network. Follow the steps below for the device that you have.

SmartLink™:
mstn-smartlink

Visit the SmartLink Setup Instructions page and follow the instructions to connect your franking machine through a wired LAN connection or Wi-Fi using the Pitney Bowes SmartLink Device.

Pitney Bowes Communication Device:
mstn-comm-device

Use the Communication Device Setup Guide and follow the instructions to connect your franking machine through a wired LAN connection or Wi-Fi using the Pitney Bowes Communication Device.

Important: On Page 12: "Ports and protocols needed by the Connectivity Device": Port 443 (HTTPs) should only be used with a DM60 (K722).

If you are unable to connect to the internet, ask your IT department or internet provider to check the internet settings before you contact Pitney Bowes. If you still need assistance, please contact us.

Related topics

UPDATED: 03 January 2023