Printing a Register report on the SendPro C, SendPro+, SendPro C Auto

Print a Register report if you need a report showing the total number of mailpieces sent.

The Register report provides the following information about your device:

• Used: The total amount used over the lifetime of the device.
• Unused: The amount currently available to print.
• Total Pieces: The total number of mailpieces run over the lifetime of the device.
• Control Sum: The control sum is the total of the amount used and unused.
• Batch Count: The current Batch Count.
• Batch Value: The current Batch Total.
• PBP Serial No: The serial number of the device.
• The date and time the report was printed.

To print a register report:

1. Tap Envelope Printing on the Home screen.
2. Tap the piece count in the upper right.
3. Tap Print Report.
4. Tap SendPro C Envelope Printer.
5. Place the envelope on the feed deck. Depending on the SendPro C model you have, feed the envelope manually or tap Start to feed the envelope.
6. Tap the back arrow to return to the Envelope Printing app.