How to clean the printhead on a J696 or J693 label printer used with SendSuite Live, SendSuite Xpress, and more

Print this support article
Products affected: J693 label printer, J696 label printer, SendSuite® Live, SendSuite® Xpress, Ascent™, Datamax thermal printers
To clean the print head on a J696 or J693 printer:
  1. Turn the printer off and unplug it.
  2. Open the cover.
  3. Unlock the print head latch and raise the print head assembly. Allow the printhead to cool before proceeding.
  4. Move media and ribbon away from the print head as necessary.
  5. Using a cotton swab moistened, not soaked, with isopropyl alcohol, gently wipe away any build-up on the print head surface, paying close attention to the burn line.
  6. Allow the print head to dry.
  7. Replace the ribbon and media.
  8. Lower the print head assembly back to the locked position.
  9. Close the cover.
  10. Plug in and turn on the printer.
  11. Feed several labels to normalize tracking.

UPDATED: June 03, 2021